User Manual

3-7
Chapter 3: BIOS setup
Conguration options: [Disabled] [Enabled]
The following item appears only when Intel
®
SpeedStep or Intel
®
Speed Shift
is available and enabled.
Turbo Mode
Conguration options: [Disabled] [Enabled]
C states
Allows you to enable or disable CPU Power Management. Conguration
options: [Disabled] [Enabled]
The following item appears only when you set C states to [Enabled].
Enhanced C-states
Allows you to enable or disable C1E. CPU will switch to minimum speed when all
cores enter C-state. Conguration options: [Disabled] [Enabled]
Package C State Limit
Set the maximum package C state limit. Conguration options: [C0/C1] [C2]
[C3] [C6] [C7] [C7S] [C8] [C9] [C10] [Cpu Default] [Auto]
[Cpu Default] Leaves to factory default value.
[Auto] Initializes to deepest available Package C State Limit.
3.3.5 GraphicsConguration
This item allows you to select a primary display from IGFX and PEG graphical
devices.
Primary Display
Allows you to select which of the IGFX/PEG Graphics devices should be the
primary display or select SG for switchable Gfx.
Conguration options: [Auto] [IGFX] [PEG]
Internal Graphics
Conguration options: [Auto] [Disabled] [Enabled]
[Auto] Keeps IGFX enabled base on the setup options.
[Disabled] Disables internal graphics.
[Enabled] Enables internal graphics.
3.3.6 PCIExpressConguration
This item allows you to congure PCI Express settings.
HYPER_PCIeX16
Conguration options: [PCIe x16 mode] [PCIe x8/x8 mode] [PCIe x8/x4/x4 mode]
PCIe x16/x8 Slot
Allows you to congure the PEG Port settings.