User Manual
Table Of Contents
- Notices
- Chapter 1: System introduction
- Chapter 2: Motherboard information
- Chapter 3: BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 PCH-FW Configuration
- 3.3.3 Trusted Computing
- 3.3.4 CPU Configuration
- 3.3.5 Graphics Configuration
- 3.3.6 PCI Express Configuration
- 3.3.7 AMT Configuration
- 3.3.8 CSM Configuration
- 3.3.9 Super IO Configuration
- 3.3.10 Serial Console Redirection
- 3.3.11 SATA And RST Configuration
- 3.3.12 Network Stack Configuration
- 3.3.13 USB Configuration
- 3.3.14 NVMe Configuration
- 3.3.15 Onboard Devices Configuration
- 3.3.16 EZ-Flash
- 3.3.17 APM Configuration
- 3.3.18 Watchdog Timer
- 3.3.19 Miscellaneous
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
3-5
Chapter 3: BIOS setup
3.3.2 PCH-FWConguration
This item allows you to congure Management Engine Technology parameters.
TPM Device Selection
Allows you to select TPM device.
[PTT] Enables PTT in SkuMgr.
[dTPM] Disables PTT in SkuMgr.
When PTT is disabled, all data saved on it will be lost.
3.3.3 Trusted Computing
Security Device Support
Allows you to enable or disable BIOS support for security device.
Conguration options: [Disabled] [Enabled]
The following items appear when a TPM device is installed on your motherboard.
SHA-1 PCR Bank
Conguration options: [Disabled] [Enabled]
SHA256 PCR Bank
Conguration options: [Disabled] [Enabled]
SHA384 PCR Bank
Conguration options: [Disabled] [Enabled]
Pending operation
Allows you to schedule an operation for security device.
Conguration options: [None] [TPM Clear]
Your computer will reboot during restart in order to change the state of security device.
Platform Hierarchy
Conguration options: [Disabled] [Enabled]
Storage Hierarchy
Conguration options: [Disabled] [Enabled]
Endorsement Hierarchy
Conguration options: [Disabled] [Enabled]
TPM 2.0 UEFI Spec Version
Allows you to select the TCG2 Spec Version support.
Conguration options: [TCG_1_2] [TCG_2]