User Manual
Table Of Contents
- Notices
- Chapter 1: System introduction
- Chapter 2: Motherboard information
- Chapter 3: BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 PCH-FW Configuration
- 3.3.3 Trusted Computing
- 3.3.4 CPU Configuration
- 3.3.5 Graphics Configuration
- 3.3.6 PCI Express Configuration
- 3.3.7 AMT Configuration
- 3.3.8 CSM Configuration
- 3.3.9 Super IO Configuration
- 3.3.10 Serial Console Redirection
- 3.3.11 SATA And RST Configuration
- 3.3.12 Network Stack Configuration
- 3.3.13 USB Configuration
- 3.3.14 NVMe Configuration
- 3.3.15 Onboard Devices Configuration
- 3.3.16 EZ-Flash
- 3.3.17 APM Configuration
- 3.3.18 Watchdog Timer
- 3.3.19 Miscellaneous
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
2-23
Chapter 2: Motherboard information
IMPORTANT!
• Scan the QR code to view the meaning of each debugging code.
• Debugging codes are only available for ASUS LPC debug cards.
• Contact your region sales representative for LPC debug cards ordering.
15. LPC Debug header (10-1 pin LPC_DEBUG)
This header allows connection to a LPC debug card.
LPC_DEBUG
PIN 1
+3V
+3V
CK_24M_DEBUG_LPC
GND
SLAD0_SIO
SLAD1_SIO
SLAD2_SIO
SLAD3_SIO
S_LFRAME#
Connector type
HEADER 2x5p, K10, 2.0mm pitch
16. I
2
C connector (6-pin I2C)
The I
2
C (Inter-Integrated Circuit) connector allows you to connect an I
2
C
compatible IoT security module.
I2C
PIN 1
+3V
NC
I2C1_SCL
I2C1_SDA
GND
Connector type
Header 2x3p, K6, 2.0mm pitch