User Manual
Table Of Contents
- Notices
- Chapter 1: System introduction
- Chapter 2: Motherboard information
- Chapter 3: BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 PCH-FW Configuration
- 3.3.3 Trusted Computing
- 3.3.4 CPU Configuration
- 3.3.5 Graphics Configuration
- 3.3.6 PCI Express Configuration
- 3.3.7 AMT Configuration
- 3.3.8 CSM Configuration
- 3.3.9 Super IO Configuration
- 3.3.10 Serial Console Redirection
- 3.3.11 SATA And RST Configuration
- 3.3.12 Network Stack Configuration
- 3.3.13 USB Configuration
- 3.3.14 NVMe Configuration
- 3.3.15 Onboard Devices Configuration
- 3.3.16 EZ-Flash
- 3.3.17 APM Configuration
- 3.3.18 Watchdog Timer
- 3.3.19 Miscellaneous
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
EB-ITX-B
2-16
10. USB 3.2 Gen 1 (up to 5Gbps) port. This 9-pin Universal Serial Bus (USB)
port is for a USB 3.2 Gen 1 device.
• USB 3.2 Gen 1 devices can only be used for data storage.
• We strongly recommend that you connect USB 3.2 Gen 1 devices to USB
3.2 Gen 1 ports for faster and better performance from your USB 3.2 Gen 1
devices.
• Due to the design of the Intel
®
400 series chipset, all USB devices
connected to the USB 2.0 and USB 3.2 Gen 1 ports are controlled by the
xHCI controller. Some legacy USB devices must update their rmware for
better compatibility.
11. USB 3.2 Gen 2 (up to 10Gbps) ports (teal blue, Type-A). These 9-pin
Universal Serial Bus (USB) ports are for USB 3.2 Gen 2 devices.
12. Line Out port (lime). This port connects to a headphone or a speaker. In
the 4 and 5.1 channel congurations, the function of this port becomes Front
Speaker Out.