User Manual
Table Of Contents
- Notices
- Chapter 1: System introduction
- Chapter 2: Motherboard information
- Chapter 3: BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 PCH-FW Configuration
- 3.3.3 Trusted Computing
- 3.3.4 CPU Configuration
- 3.3.5 Graphics Configuration
- 3.3.6 PCI Express Configuration
- 3.3.7 AMT Configuration
- 3.3.8 CSM Configuration
- 3.3.9 Super IO Configuration
- 3.3.10 Serial Console Redirection
- 3.3.11 SATA And RST Configuration
- 3.3.12 Network Stack Configuration
- 3.3.13 USB Configuration
- 3.3.14 NVMe Configuration
- 3.3.15 Onboard Devices Configuration
- 3.3.16 EZ-Flash
- 3.3.17 APM Configuration
- 3.3.18 Watchdog Timer
- 3.3.19 Miscellaneous
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
1-8
Chapter 1: System introduction
1.6 Installing the desk mount
You can install your Edge Computer to a suitable surface using the desk mounts.
Align the desk mount with the screw holes on the bottom of the Edge Computer, then secure
the desk mount to your Edge Computer using the bundled screws.
IMPORTANT! When installing the Edge Computer into a cabinet or on the ground, we strongly
recommend installing your Edge Computer so that the Edge Computer sits upright with the top of the
Edge Computer facing upwards to allow for efcient heat dissipation.
Screw Dimension
7.7mm
6.0mm
Length:6.0mm
Diameter:7.7mm