User Manual

1-6
Chapter 1: System introduction
8. USB 3.2 Gen 2 (up to 10Gbps) ports (teal blue, Type-A). These 9-pin Universal
Serial Bus (USB) ports are for USB 3.2 Gen 2 devices.
9. Line Out port (lime). This port connects to a headphone or speaker. In a 4, 5.1, or
7.1-channel conguration, the function of this port becomes Front Speaker Out.
10. Line In port (light blue). This port connects to a tape, CD, DVD player, or other audio
sources.
11. Power connector. Plug the power cord to this connector.
• RATING: 100- 240V—, 50-60Hz, 4.0A
• The CPU, CPU fan(requires air flow above 42.06 CFM), RAM, SSD, and rear I/O serial
ports are purchased separately.
12. Power supply unit fan vent. This vent is for the PSU fan that provides ventilation
inside the power supply unit.
13. Air vents. These vents allow air ventilation.
14. Power button. Press this button to turn the system on.
15. LAN (RJ-45) ports. These ports allow Gigabit connection to a Local Area Network
(LAN) through a network hub.
LAN port LED indications
Activity/Link LED Speed LED
Status Description Status Description
OFF No link OFF 10Mbps connection
ORANGE Linked ORANGE 100Mbps connection
BLINKING Data activity GREEN 1Gbps connection
LAN port
SPEED LED
ACT/LINK LED
16. Expansion slot brackets. Remove the expansion slot bracket when installing an
expansion card.
17. COM port. This 9-pin COM port is for a pointing device or other serial device.
18. COM ports (optional). These 9-pin COM ports are for pointing devices or other serial
devices.