User Guide

ADSL Modem/Router User’s Guide 21
WAN IP Address: IP address used on the WAN (line) interface
(Provided by your Internet Service Provider)
Subnet Mask: Subnet mask on the WAN (line) interface
(Provided by your Internet Service Provider)
Remote IP Address From: inATMARP - Use inverse ATMARP protocol to determine
the IP address
Static Remote IP Address - Specify the IP address of the
remote end.
Function: NAT (Network Address Translation) - check to enable.
Click Submit after selections are completed and restart the modem.
NOTE: You must also setup the Ethernet Configuration and setup the Default
Gateway in the Routing Table Maintenance.
4. Basic Configuration