User Manual

Chapter 2: Hardware Setup
2-24
2.6.4 Installing a PIKE II card
Unplugthepowercordbeforeinstallingorremovinganexpansioncard.Failuretodoso
maycauseseveredamagetothemotherboardandothersystemcomponents!
1. Remove the GPU bar and air duct from the chassis, please refer to section
Air Duct
for
more details.
2. Loosentheheatsinkscrewsintheordershown,thenliftandremovetheCPUand
heatsink.
TheheatsinkscrewsareT30models.Atorquevalueof12inch-lbfisrecommended.