User Manual

Chapter 2: Hardware Setup
2-18
8. RemovethescrewsoftheVGAsupportson
the GPU bar so that you can adjust it to match
thepositionoftheinstalledexpansioncard.
Ensurethatthereisasupportoneithersideof
theexpansioncard,thenreplacethescrews
removed previously.
9. Position the GPU bar in a diagonal position, then place it into the system chassis.
10. RotateandadjusttheGPUbarinananti-clockwisedirectionuntilthesupportsadjusted
instep8tinbetweentheexpansioncard(s).