User Manual

Chapter 2: Hardware Setup
2-2
2.1 Chassis cover
2.1.1 Removing the side covers
• Ensurethatyouunplugthepowercordbeforeremovingthesidecover.
• Takeextracarewhenremovingthesidecover.Keepyourngersfromcomponents
inside the chassis that can cause injury, such as the CPU fan, rear fan, and other
sharp-edged parts.
• Theimagesofthesystemshowninthissectionareforreferencepurposesonlyand
maynotexactlymatchthemodelyoupurchase.
1. Remove the two (2) screws from the
rear of the side cover, then set them
aside.
2. Lift the side cover to remove it.
Be careful not to apply pressure
to the air vent on the side cover to
avoid damages to the system.
3. Repeat steps 1 and 2 to remove the other side cover.
USB BIOS
Flashback
TYPE C
USB3.0
USB3.0
USB3.1
10
MIC IN
LINE OUT
LINE
REAR
SPDIF OUT
C/SUB
USB BIOS
Flashback
TYPE C
USB3.0
USB3.0
USB3.1
10
MIC IN
LINE OUT
LINE
REAR
SPDIF OUT
C/SUB