User Guide

46 Voice Gateway / Pocket Voice Gateway
7. System Operation
You can check the following items to make sure your configuration setting
is correct. If you cannot have the correct result, please check the User Menu
to see more details about system setting. Or you can connect to our custom-
ers support to inquire the setting.
a. Use inner conference call to make phone call between each phones on
the voice gateway:
- Pick up one of telephone set, you will hear the dial tone.
- Then dial ***1 to ***4 (for 4 ports) to make phone call to another one.
- If the one is on-hook, voice gateway will ring the telephone. Pick up
the phone, then the phone call establish well.
- If the one is already in use then you will hear busy tone.
b. Make the VoIP phone to VoIP Networks
- Pick up one of telephone set, you will hear the dial tone.
- Then the IP address of called party. For example, if you want to dial
VoIP phone to 192.168.100.102, you have to dial 192*168*100*102#.
- If called party is available then you will hear ring back tone. And if
he accept the call, the phone call establish well.
- If the one is already in use then you will hear busy tone.
c. For H.323 phone in this case, you cannot dial E.164 telephone number
(the traditional telephone number, like the one as your cell phone). And
for multiple ports voice gateway, you cannot make VoIP phone to speci-
fied port. For example, you cannot dial to P2 directly without any set-
ting. The P2 will receive the call only when P1 is already in use. But you
can use other port (P2, P3, P4) to dial out without any limitations.
d. For MGCP phone, you need Call Agent to control the MGCP phone.
Therefore, you cannot dial IP address in this example.
DC POWER Reset
Console
LAN WANP1 P2 P3 P4
PC
PHONE 1
POWER
192.168.100.101
192.168.100.102
PHONE 2
VoIP
Networks