User Guide

2 Voice Gateway / Pocket Voice Gateway

USER'S NOTICE

Product Name: Voice Gateway / Pocket Voice Gateway

Manual Revision: 1.00 E790

Release Date: Aug 2001

No part of this manual, including the products and software described in it, may be

reproduced, transmitted, transcribed, stored in a retrieval system, or translated into

any language in any form or by any means, except documentation kept by the purchaser

for backup purposes, without the express written permission of THE MANUFACTURER.

THE MANUFACTURER PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY

OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED

TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE

MANUFACTURER, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE

LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS,

LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN

IF THE MANUFACTURER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR

PRODUCT.

Product warranty or service will not be extended if: (1) the product is repaired, modified

or altered, unless such repair, modification of alteration is authorized in writing by THE

MANUFACTURER; or (2) the serial number of the product is defaced or missing.

Products and corporate names appearing in this manual may or may not be registered

trademarks or copyrights of their respective companies, and are used only for

identification or explanation and to the owners’ benefit, without intent to infringe.

The product name and revision number are both printed on the product itself. Manual

revisions are released for each product design represented by the digit before and

after the period of the manual revision number. Manual updates are represented by

the third digit in the manual revision number.

For previous or updated manuals, BIOS, drivers, or product release information, contact

THE MANUFACTURER.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE

FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE

AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A

COMMITMENT BY THE MANUFACTURER. THE MANUFACTURER ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT

MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE

DESCRIBED IN IT.