User Guide

18 Voice Gateway / Pocket Voice Gateway
5. System Configuration
5.1.4. Console Command Set
1. System Commands
h323 (valid only on H.323 Client)
Enter H.323 Client [H323] Command Group.
help
Display the help menu. It lists all available commands in the current command group.
ip
Enter TCP/IP [IP] Command Group.
info
Display all information. It shows all information about the Voice Gateway/Pocket Voice Gate-
way, including hardware and software version, Internet configuration, and run-time status.
mg (valid only on MGCP Client)
Enter MGCP Client [MG] Command Group.
ping
Send ICMP echo request. Use this command to detect the connectivity with other Internet de-
vices.
quit
Quit console command mode.
reboot
Reboot the system.
tel
Enter Telephony [TEL] Command Group.
2. Telephony Commands [TEL]
back
Return Root Command Group.
help
Display help menu. It lists all available commands in the current command group.
info
Display Telephony information.
set_sd_line
<Usage>: set_sd_line [line]
Input up to 8 Speed Dial entries SD(2~9) of a line.
line: Specify the line number of configuration.
[option]
? Display this help.
[prompt]
speed dial phone: max. 19 digits