User Guide

12 Voice Gateway / Pocket Voice Gateway
4.1.2. Rear Panel Descriptions
Voice Gateway
4. Installation
1. DC Multiple-voltage Power Input Jack
The provided power adapter converts AC power to multiple-voltage DC
power for use with this jack. Power supplied through this jack will sup-
ply power to the voice gateway
2. Reset
The reset button, when pressed, resets the voice gateway without the
need to unplug the power cord.
3. P1 - P4 (Phone Lines)
These ports are connected to either telephone sets or telco’s telephone
line depending to different models:
FXS only model: P1-P4 are connecting to telephone sets
FXO/FXS model: Line is connecting to telco’s telephone line while P2-
P4 are connecting to telephone sets.
FXO only model: L1-L4 are connecting to telco’s telephone line.
4. CONSOLE
The RJ45 port supports the RS232 terminal interface for voice gateway
management
5. LAN (optional)
The LAN port supports 10/100Base-T networks. This port allows your
PC to be connected to the voice gateway through a CAT.5 twisted pair
Ethernet cable.
6. WAN
The WAN port supports 10/100Base-T networks. This port (built with
crossover) allows your voice gateway to be connected to an Internet
Access device, e.g. router, cable modem, ADSL modem, through a CAT.5
twisted pair Ethernet cable.
DC POWER Reset
Console
LAN WANP1 P2 P3 P4
1 3 4 652