User Guide

Wireless Cable Modem User’s Manual

Using the Wireless Cable Modem

Installing the

Wireless

Cable Modem

Take the following steps to accomplish the installation procedure:

1. Connect the cable TV coaxial cable to the input connector of a signal splitter.

2. Connect a coaxial cable from one of the output connectors on the splitter to the input

connector of your TV set.

3. Use another coaxial cable to connect the other output connector on the splitter and the

RF connector on the rear panel of the wireless cable modem.

4. Connect the LAN cable from the LAN port on your computer to the LAN port on the rear

panel of the wireless cable modem. You can also connect to a PC with wireless PC

card (see “Configuring Wireless Settings”)

5. Connect the AC power adapter to the DC +5V/2.5A input jack on the rear panel of the

wireless cable modem. Plug in the AC power adapter to an electrical outlet.

6. Powering Up: When all connections have been properly made and the power is ON,

the wireless cable modem will automatically start the self-test and search for the active

cable channel provided by your cable operator.

NOTES:

• If you are not using a television on the cable line, you may skip steps 1 to 3 and

connect the cable TV coaxial cable directly to the RF connector on the rear panel of the

cable modem.

• Install the Wiireless cable modem as high as possible.