User Guide

10
Wireless Cable Modem User’s Manual
ResetCable Console USB 10/100-BaseT
1 2 3 4 65
DC +5V/2.5A
1. DC +5V/2.5A Power Input Jack
The provided power adapter converts AC power to DC power for use with this jack.
Power supplied through this jack will supply power to the cable modem.
2. RF Connector
The connector may be located right next to the power input jack or the serial port. The
F-Type female connector allows cable data communication between the cable modem
and the cable service provider through a coaxial cable.
3. Reset Switch
The reset button, when pressed, resets the cable modem without the need to unplug
the power cord.
4. Serial Port
The 9-pin D-sub serial port supports the RS-232 terminal interface for advanced cable
modem management.
5. 10/100-BaseT LAN Ports
The LAN ports support 10Base-T or 100Base-TX networks. These ports allow your PC or
Ethernet hub to be connected to the cable modem through a CAT.5 twisted pair LAN cable.
Using the Wireless Cable Modem
Rear Panel