User Guide

Using the Cable Modem

Installing the

Cable Modem

Take the following steps to accomplish the installation procedure:

1. Connect the cable TV coaxial cable to the input connector of a signal splitter.

2. Connect a coaxial cable from one of the output connectors on the splitter to the input

connector of your TV set.

3. Use another coaxial cable to connect the other output connector on the splitter and the

RF connector on the rear panel of the cable modem.

4. Connect the LAN cable from the LAN port on your computer to the LAN port on the

rear panel of the cable modem.

5. Connect the AC power adapter to the DC +5V/2A input jack on the rear panel of the

cable modem. Plug in the AC power adapter to an electrical outlet.

NOTE: If you are not using a television on the cable line, you may skip steps 1 to 3 and

connect the cable TV coaxial cable directly to the RF connector on the rear panel of the cable

modem.

Splitter

Cable Modem

Cable Service Connections

Cable

Modem

Computer

To Cable

Network

2-Way

Splitter

To PC

DC+5V/2A ResetCable Console USB 10/100-BaseT

To Electrical Outlet

To Splitter or

Cable Network

Rear Panel Connections

Step 3

Step 4Step 5