User Guide

12 ASUS CD-R/RW Drive User’s Manual
When you are planning to use 8 cm discs your drive should be mounted
horizontaly or you should use an adapter (for information contact your local
supplier).
4. You have several possibilities to install your IDE data cable depending on your
existing configuration:
A) Hard disk connected as Master to Primary IDE Port, CD-ROM connected
as Master to Secondary IDE Port: Connect the CD-R/RW Drive as Slave
to Secondary IDE Port.
II. INSTALLATION
II. Installation
Drive
JUMPER
BLOCK
PC Configuration
After Installation
Existing PC
Configuration
Master Slave
Primary Port Hard Disk —
Secondary Port CD-R/RW Drive
Master Slave
Primary Port Hard Disk —
Secondary Port ——
CSM
S
JUMPER
BLOCK
PC Configuration
After Installation
Existing PC
Configuration
Master Slave
Primary Port Hard Disk —
Secondary Port CD-ROM CD-R/RW Drive
Master Slave
Primary Port Hard Disk —
Secondary Port CD-ROM —
CSM
S
B) Single hard disk connected as Master to Primary IDE Port: Connect the
CD-R/RW Drive as Master to Secondary Port.