User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Knowing BIOS
- 4.2 BIOS setup program
- 4.3 My Favorites
- 4.4 Main menu
- 4.5 Ai Tweaker menu
- 4.6 Advanced menu
- 4.6.1 Platform Misc Configuration
- 4.6.2 CPU Configuration
- 4.6.3 System Agent (SA) Configuration
- 4.6.4 PCH Configuration
- 4.6.5 PCH Storage Configuration
- 4.6.6 PCH-FW Configuration
- 4.6.7 Onboard Devices Configuration
- 4.6.8 APM Configuration
- 4.6.9 USB Configuration
- 4.6.10 Network Stack Configuration
- 4.6.11 NVMe Configuration
- 4.6.12 HDD/SSD SMART Information
- 4.7 Monitor menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Exit menu
- 4.11 Updating BIOS
- Chapter 5: RAID Configuration
- Appendix
2-21
ASUS E500 G5
2.8.3 Installing M.2 (NGFF) cards
To install an M.2 card:
1. Locate the M.2 connector (M.2(SOCKET3)) on the motherboard.
• Please pay attention when removing the screw, the stand screw might be removed
together with it.
• Ensure that the M.2 card is positioned between the screw and the stand screw before
securing it.
Stand screw
Screw
NGFF1
Screw hole
2. Remove the screw on the stand screw.
3. Prepare the M.2 card.
4. Align and insert the M.2 card into the
M.2 connector (M.2(SOCKET3)).
5. Secure the M.2 card with the screw you
removed in step 2.