User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Knowing BIOS
- 4.2 BIOS setup program
- 4.3 My Favorites
- 4.4 Main menu
- 4.5 Ai Tweaker menu
- 4.6 Advanced menu
- 4.6.1 Platform Misc Configuration
- 4.6.2 CPU Configuration
- 4.6.3 System Agent (SA) Configuration
- 4.6.4 PCH Configuration
- 4.6.5 PCH Storage Configuration
- 4.6.6 PCH-FW Configuration
- 4.6.7 Onboard Devices Configuration
- 4.6.8 APM Configuration
- 4.6.9 USB Configuration
- 4.6.10 Network Stack Configuration
- 4.6.11 NVMe Configuration
- 4.6.12 HDD/SSD SMART Information
- 4.7 Monitor menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Exit menu
- 4.11 Updating BIOS
- Chapter 5: RAID Configuration
- Appendix
Chapter 2: Hardware Setup
2-10
2.5 Front panel cover
Before you can install a 5.25-inch drive, you should first remove the front panel cover.
Ensure to unplug the power cable before installing or removing any system components.
Failure to do so may cause damage to the motherboard and other system components!
2.5.1 Removing the front panel cover
To remove the front panel cover:
1. Locate the front panel assembly lock then slide it outward to unlock the latches that
secures the front panel cover to the chassis.
2. Remove the front panel assembly from the chassis and set it aside.
Front panel assembly
Assembly lock