User Manual

4-14
Chapter 4: BIOS Setup
The following items appears only when you set C-States to [Enabled].
Enhanced C-States [Enabled]
Allows you to enable or disable C11E. Enable this item to allow the CPU to switch to
minimum speed when all cores enter C-State.
Congurationoptions:[Disabled][Enabled]
C-State Auto Demotion [C1 and C3]
ThisitemallowsyoutoconguretheC-stateautodemotion.
Congurationoptions:[Disabled][C1][C3][C1andC3]
C-State Un-demotion [C1 and C3]
ThisitemallowsyoutoconguretheC-stateUn-demotion.
Congurationoptions:[Disabled][C1][C3][C1andC3]
Package C-State Demotion [Disabled]
ThisitemallowsyoutocongurethePackageC-StateDemotion.
Congurationoptions:[Disabled][Enabled]
Package C-State Un-demotion [Disabled]
ThisitemallowsyoutocongurethePackageC-stateUn-demotion.
Congurationoptions:[Disabled][Enabled]
Package C-state Limit [Auto]
ThisitemallowsyoutoselectthemaximumpackageC-statelimitsetting.
Congurationoptions:[C0/C1][C2][C3][C6][C7][C7S][C8][C9][C10][CPUDefault]
[Auto]
Thermal Monitor [Enabled]
Allows you to enable or disable Thermal Monitoring.
Congurationoptions:[Disabled][Enabled]
GT - Power Management Control
RC6(Render Standby) [Enabled]
This item allows you to enable or disable standby support.
Congurationoptions:[Disabled][Enabled]
Maximum GT frequency [Default Max Frequency]
This item allows you to set the maximum GT frequency limit. Choose between 350MHz
(RPN) and 1150 MHz (RP0). Values beyond the range will be clipped to the min/max
supported by SKU.
Congurationoptions:[DefaultMaxFrequency][100Mhz]-[1200Mhz]
Disable Turbo GT Frequency [Disabled]
[Enabled] DisabledTurboGTFrequency
[Disabled] GTFrequencyisnotlimited.