User Manual

4-42
Chapter 4: BIOS Setup
4.11.1 System Event Log
AllowsyoutochangetheSELeventlogconguration.
Enabling/Disabling Options
SEL Components [Enabled]
Allows you to enable or disable event logging for error/progress codes during boot.
Congurationoptions:[No][Yes,Onnextreset][Yes,Oneveryreset]
• ThefollowingitemsarecongurableonlywhenSEL Components is set to [Enabled].
• Allvalueschangedheredonottakeeffectuntilcomputerisrestarted.
Erasing Settings
Erase SEL [No]
Allows you to choose options for erasing SEL.
Congurationoptions:[No][Yes,Onnextreset][Yes,Oneveryreset]
When SEL is Full [Do Nothing]
Allows you to choose options for reactions to a full SEL.
Congurationoptions:[DoNothing][EraseImmediately]
Custom EFI Logging Options
Log EFI Status Codes [Error code]
Allows you to select which codes to log.
Congurationoptions:[Disabled][Both][Errorcode][Progresscode]