User Manual

4-32
Chapter 4: BIOS Setup
HD Audio Advanced Configuration
iDisplay Audio Disconnect [Disabled]
Allows you to enable or disable iDisplay Audio Disconnect.
Congurationoptions:[Disabled][Enabled]
Codec Sx Wake Capability [Disabled]
AllowsyoutoenableordisableCodecSxWakeCapability.
Congurationoptions:[Disabled][Enabled]
PME Enable [Disabled]
AllowsyoutoenableordisablePMEwakeofHDAudiocontrollerduring
POST.
Congurationoptions:[Disabled][Enabled]
ThefollowingitemiscongurableonlywhenyousetAudio Link Mode to [Soundwire].
Soundwire Buffer RCOMP Setting [Non-ACT Topology]
This item allows you to select the Soundwire Buffer RCOMP Setting.
Congurationoptions:[Non-ACTTopology][ACTTopology]
HD Audio Link Frequency [24 MHz]
AllowsyoutoselecttheHDAudioLinkFrequency.
Congurationoptions:[6MHz][12MHz][24MHz]
iDisplay Audio Link Frequency [96 MHz]
AllowsyoutoselecttheiDisplayAudioLinkFrequency.
Congurationoptions:[48MHz][96MHz]
iDisplay Audio Link T-Mode [2T Mode]
AllowsyoutoselecttheiDisplayAudioLinkT-Mode.
Congurationoptions:[1TMode][2TMode]
LAN Wake from DeepSx [Enabled]
ThisitemallowsyoutoenablewakefromDeepSxbytheassertionofLAN_WAKE#pin.
Congurationoptions:[Disabled][Enabled]
SLP_LAN# Low on DC Power [Enabled]
ThisitemallowsyoutoenableordisableSLP_LAN#LowonDCPower.
Congurationoptions:[Disabled][Enabled]
Disqualify GBE Disconnect And ModPhy PG [Enabled]
This item allows you to enable or disable Disqualify GBE Disconnect And ModPhy PG.
Congurationoptions:[Disabled][Enabled]