Hardware Installation Guide Hardware Installation Guide Instrukcja Instalacyjna d o ka r t w i z y j n y c h NVB-B/-BLV
DVR-user’s manual—integrated software of Capture Card © Copyright 2005, Novus Security Sp. z o.o.
Hardware Installation Guide NVB-B/-BLV
DVR-user’s manual—integrated software of Capture Card TABLE OF CONTENTS: 1. 2. 3. 4. 5. 6. 7. PREFACE ……..……………………………………………….………….5 SPECIFICATION OF NVB-B/-BLV ...….………………………………...6 INSTALLATION NOTE …..…………...………………………………….8 PRODUCTS AND COMPONENTS ………………………………………9 BOARD DESCRIPTION …....…………………………………..………..11 INSTALL BOARD ..…………………………..………………………….17 ACCESSORIES …………………………………..………….…………...19 Technical modification are subject to change without prior notice. Misprints reserved.
DVR-user’s manual—integrated software of Capture Card 1. Preface: This is a guide book that explains the hardware components and provides you the step by step installation of DVR board. For the software explanation please refer to “Installation and User’s Guide”. The pictures and names of the products are subject to change depending on hardware upgrade. But, the usages may be similar. © Copyright 2005, Novus Security Sp. z o.o.
DVR-user’s manual—integrated software of Capture Card 2. Specification of NVB-B/-BLV: 1. 1~32 Camera inputs/output Up to 16 camera inputs are available on screen for digital handling. - Normal input condition: 75 Ohm, 1 Vp-p 2. 1~16 Sensor inputs Up to 16 sensors can be linked to the system. - Power supply of DC 12 Volt is required from outside. 3.
DVR-user’s manual—integrated software of Capture Card 10. Manual and Auto Backup Data can be preserved through various formats (DAT, CD, or DVD) and data from specific cameras and/or time periods can be specifically isolated for backup as well. Much like scheduled recording, backup of data can be scheduled as well. 11. Digitalized Video Search Recorded data features digital playback for each camera simultaneously or one at a time.
DVR-user’s manual—integrated software of Capture Card 3. Installation Note: 1. Recommend to use Intel Chipset mother board (i845, i865– without i845G, i865G , i9xx ). a) Not compatible with mother boards that are specifically designed such for Small Form Factor (SFF-Mobile). b) Recommended to use ASUS, Gigabyte and Intel Mother boards. 2. Recommend Intel Pentium 4 2.4 or higher for CPU. a) CPU that is lower than Intel Pentium 4 2.4 can reduce the recording frame rate. 3.
DVR-user’s manual—integrated software of Capture Card 4. Products and Components: 4.1 DVR Board: NVB-200/16BLV NVB-100/16BLV NVB-200/16B NVB-100/16B NVB-200/32B - Master NVB-200/32B - Slave NVB-400/32B - Master NVB-400/32B - Slave © Copyright 2005, Novus Security Sp. z o.o.
DVR-user’s manual—integrated software of Capture Card 4.2 Accessories: RS-485 Board RS-232C Cable Pigtail Cable Sensor Port Video Cable RS-485 converter + TVOUT board for 32 channel Audio Cable Reset Cable Sensor Cable 32 channel TV-OUT connection Cable 1 32 channel TV-OUT connection Cable 2 © Copyright 2005, Novus Security Sp. z o.o.
DVR-user’s manual—integrated software of Capture Card 5. Board Description: 5.1. NVB-200/16BLV: 2 1 3 4 6 5 7 1. 2. 3. 4. 5. 6. 7. TV-Out select Jumper IO socket : Connect sensor, relay board TV-Out socket : Connect TV-Out board Video input socket : 1~8 channel video input Video input socket : 9~16 channel video input Relay expansion socket : Connect relay expansion Watchdog socket : Connect watchdog cable © Copyright 2005, Novus Security Sp. z o.o.
DVR-user’s manual—integrated software of Capture Card 5.2. NVB-100/16BLV: 1 2 3 4 6 5 7 1. 2. 3. 4. 5. 6. 7. TV-Out select Jumper IO socket : Connect sensor, relay board TV-Out socket : Connect TV-Out board Video input socket : 1~8 channel video input Video input socket : 9~16 channel video input Relay expansion socket : Connect relay expansion Watchdog socket : Connect watchdog cable © Copyright 2005, Novus Security Sp. z o.o.
DVR-user’s manual—integrated software of Capture Card 5.3. NVB-200/16B: 1 2 3 4 6 5 7 1. 2. 3. 4. 5. 6. 7. TV-Out select Jumper IO socket : Connect sensor, relay board TV-Out socket : Connect TV-Out board Video input socket : 1~8 channel video input Video input socket : 9~16 channel video input Relay expansion socket : Connect relay expansion Watchdog socket : Connect watchdog cable © Copyright 2005, Novus Security Sp. z o.o.
DVR-user’s manual—integrated software of Capture Card 5.4. NVB-100/16B: 3 1 2 4 5 7 6 8 1. 2. 3. 4. 5. 6. 7. 8. TV-Out select Jumper External TV-OUT socket : Connect to TV-OUT port in back panel. IO socket : Connect sensor, relay board TV-Out socket : Connect TV-Out board Video input socket : 1~8 channel video input Video input socket : 9~16 channel video input Relay expansion socket : Connect relay expansion Watchdog socket : Connect watchdog cable © Copyright 2005, Novus Security Sp. z o.o.
DVR-user’s manual—integrated software of Capture Card 5.5. NVB-200/32B: 1 2 3 4 6 5 7 MASTER Board 8 9 10 12 11 SLAVE Board 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. TV-Out select Jumper IO socket : Connect sensor, relay board TV-Out socket : Connect TV-Out board Video input socket: 1~8 ch. video input Video input socket: 9~16 ch.
DVR-user’s manual—integrated software of Capture Card 5.6. NVB-400/32B: 1 2 3 4 6 5 7 MASTER Board 8 9 10 12 11 SLAVE Board 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. TV-Out select Jumper IO socket : Connect sensor, relay board TV-Out socket : Connect TV-Out board Video input socket: 1~8 ch. video input Video input socket: 9~16 ch.
DVR-user’s manual—integrated software of Capture Card 6. Install Board: 6.1. NVB-100/16B, NVB-200/16B, NVB-100/16BLV, NVB-200/16BLV: 1 2 3 4 5 1. 2. 3. 4. 5. 1~8 channel pigtail goes to the upper socket. 9~16 channel pigtail goes to the lower socket. IO cable connects to Sensor port. IO cable connects to IO socket on the DVR board. Connect Watchdog cable. Make Watchdog cable connection as shown in next figure. © Copyright 2005, Novus Security Sp. z o.o.
DVR-user’s manual—integrated software of Capture Card 6.2. NVB-200/32B, NVB-400/32B: 1 2 7 44 66 1. 2. 3. 4. 5. 6. 7. 3 Connect TV-Out cable to TV-Out port in Master card. Connect TV-Out cable to TV-Out port in TV-out board. Connect TV-Out cable to TV-Out port in Slave card. Connect TV-Out cable to TV-Out port in TV-out board. Connect white cable to left side of jumper in Slave card. Connect white cable to the pin. (black cable goes to empty side) Connect CCTV monitor.
DVR-user’s manual—integrated software of Capture Card 7. Accessories: 7.1. Pigtail: Pigtail cable 1 ~ 4, 9 ~ 13 : Black BNC 5 ~ 8, 13 ~ 16 : White BNC 7.2. Sensor Port: Sensor port pin number 1 ~ 8, 9 ~ 16 : Signal input G : Ground 4, 3, 2, 1 : Relay output © Copyright 2005, Novus Security Sp. z o.o.
DVR-user’s manual—integrated software of Capture Card 7.3. RS232 to RS422/485 Converter: 2 1 3-1 3 3-2 5 1. 2. 3. 4. 5. 6. 4 Connect to system’s Com port. Connect to PTZ port converterRS-485. These are power supply sockets. Need to connect only one of them. When you choose to use included power supply cable connect this to 3-2. Connect to DVR board. If one of power supplies(3, 3-1) has been connected there is no need to connect this cable.
DVR-user’s manual—integrated software of Capture Card 7.4. RS232 to RS422/485 Converter + TV-OUT board for 32 channel: 1 3 2 3-1 6 4 5 8 7 3-2 9 10 1. 2. 3. 4. 5. 6. 7. 8. Connect to system’s Com port.. Connect to PTZ port converterRS-485 + TV-OUT board These are power supply sockets. Need to connect only one of them. TV-Out socket : Connect to Master card. TV-Out socket : Connect to Slave card. Connect to Slave card. When you choose to use included power supply cable, connect this to 3-2.
DVR-user’s manual—integrated software of Capture Card 7.5. Sound Recording: After connecting Microphone, ensure that “Line In” and “Microphone In” is not muted in the Windows sound setting. Must have Direct X 8.0 or higher. 7.5-1. 1 Channel sound 1 1. Connect to “Microphone In” of sound card. 7.5-2. 2 Channel sound 2 1. 2. Connect to “Line In” of sound card with included 2 channel audio cable. Connect microphones to the audio cable. Must use amplified microphone.
DVR-user’s manual—integrated software of Capture Card 7.5-3. 4 channel sound 3 1. 2. 3. 4 Additional sound card is needed (total 2 sound cards – 1 onboard and 1 PCI). Connect “Line In” in both sound cards with included 2 channel audio cable. Connect microphones to the audio cables. Must use amplified microphones. * Using 3 channels is the same as picture shown above. © Copyright 2005, Novus Security Sp. z o.o.
DVR-user’s manual—integrated software of Capture Card © Copyright 2005, Novus Security Sp. z o.o.
NOVUS Security Sp. z o.o. Pulawska Street 431, 02-801 Warsaw, Poland phone.: (22) 546 0 700, fax: (22) 546 0 719 www.novuscctv.com 2005-10-28.