User's Manual
Table Of Contents
- 1 A quick look
- 2 Creating your network
- 3 Configuring via the web GUI
- Logging into the web GUI
- Setting up the wireless security settings
- Managing your network clients
- Monitoring your USB device
- Using AiDisk for an FTP Server and Network Neighborhood setup
- Using your router as a UPnP Media Server
- Managing EZQoS Bandwidth
- Configuring the Advanced settings
- Setting up your network printer
- 4 Using the utilities
- 5 Troubleshooting
- Appendices
52
Cannot find the router:
• Press the Reset button at the rear panel for more than five
seconds.
• Check the setting in the wireless adapter such as SSID and
encryption settings.
• Check if the wireless indicator on the front panel is off. Turn
the wireless switch at the rear panel on/off.
CannotaccesstheInternetviawirelessLANadapter.
• Move the router closer to the wireless client.
• Check whether the wireless adapter is connected to the correct
ADSL router.
• Check whether the wireless channel in use conforms to the
channels available in your country/area.
• Check the encryption settings.
• Retry using another Ethernet cable.
Internetisnotaccessible.
• Check the status indicators on the ADSL modem and the ADSL
router.
• Check if the WAN LED on the ADSL router is ON. If the LED is not
ON, change the cable and try again.
• Check if the wireless indicator on the front panel is off. Turn the
wireless switch at the rear panel on/off.
WhenADSLModem“Link”lightisON(notblinking),this
meansInternetAccessispossible.
• Restart your computer.
• Refer to the Quick Start Guide of the ADSL router and re-
configure the settings.
• Check if the WAN LED on the ADSL router is ON.
• Check the wireless encryption settings.
• Check if the computer can get the IP address (via both wired
network and wireless network).
• Ensure that your web browser is configured to use the local
LAN, and is not configured to use a proxy server.