User's Manual
Table Of Contents
- 1 A quick look
- 2 Creating your network
- 3 Configuring via the web GUI
- Logging into the web GUI
- Setting up the wireless security settings
- Managing your network clients
- Monitoring your USB device
- Using AiDisk for an FTP Server and Network Neighborhood setup
- Using your router as a UPnP Media Server
- Managing EZQoS Bandwidth
- Configuring the Advanced settings
- Setting up your network printer
- 4 Using the utilities
- 5 Troubleshooting
- Appendices
35
3. In the Enable the DHCP Server? field, tick Yes.
4. In the IP Pool Starting Address field, key in the starting IP
address.
5. In the IP Pool Ending Address field, key in the ending IP
address.
6. In the Lease Time field, key in the time that the IP addresses
expire and the ADSL router automatically assigns new IP
Addresses for the network clients.
IMPORTANT!
• For the IP Pool Starting and Ending IP addresses, we
recommend that you use:
• IP address: 192.168.1.xxx (xxx can be any number between
2 and 254)
• IP Pool Starting Address should not be greater than the IP
Pool Ending Address.