User's Manual
Table Of Contents
- 1 A quick look
- 2 Creating your network
- 3 Configuring via the web GUI
- Logging into the web GUI
- Setting up the wireless security settings
- Managing your network clients
- Monitoring your USB device
- Using AiDisk for an FTP Server and Network Neighborhood setup
- Using your router as a UPnP Media Server
- Managing EZQoS Bandwidth
- Configuring the Advanced settings
- Setting up your network printer
- 4 Using the utilities
- 5 Troubleshooting
- Appendices
10
Connecting your devices
Wired connection
IMPORTANT!
• Use wired connection in setting up your ADSL router to avoid
possible setup problems due to wireless uncertainty.
• Before setting up your DSL-N55U, do the following:
• Disconnect the cables/wires from your existing modem
setup. If your modem has a backup battery, remove it as
well.
• Reboot your computer (recommended).
Network
cable
To set up your ADSL router via wired connection:
1. Insert the splitter’s line connector to the phone outlet and
connect your phone into the phone port.
2. Using the bundled phone cable, connect your DSL N55U’s ADSL
port to the splitter’s DSL port.
3. Using the bundled network cable, connect your computer to
the ADSL router’s LAN port.