User guide

7
Rear
87652 4
1
3
Reset button
This button resets or restores the system to its factory default settings.
Power (DC-In) port
Insert the bundled AC adapter into this port and connect your router to a
power source.
Power switch
Press to power on or off the system.
WPS button*
Press this button for more than four seconds to establish a secure wireless
connection with a WPS-supported wireless device.
*The WPS button can be used as a WiFi button by changing the settings in
the Advanced Settings > Administration page.
USB 2.0 port
Insert USB 2.0/USB 1.1 devices such as USB hard disks or USB flash drives into
these ports.
Ethernet WAN port
Connect an RJ-45 Ethernet cable to this port to establish WAN connection.
LAN 1~4 ports
Connect network cables into these ports to establish LAN connection.
DSL WAN (ADSL) port
Connect to a splitter or to a telephone outlet via an RJ-11 cable.
e8931_dsl-n16u_manual.indd 7 1/9/14 1:01:30 PM