User Manual

DSL-N13 Wireless ADSL 2/2+ Modem Router User Manual
42
Setting up routing protocol - RIP
RIP stands for Rounting Information Protocol. DSL-N13 supports RIPv1 and RIPv2.
1. Click
Advanced Setup -> Routing -> RIP
to open the conguration page.
2. To activate RIP, select
Enabled
radio button for global RIP mode.
3. To congure an individual interface, select the desired RIP version and operation
and check the
Enabled
checkbox for the interface.
4. Press
Save/Apply
to save and activate the settings.