User Manual
DSL-N13 Wireless ADSL 2/2+ Modem Router User Manual
35
2. Dene a
Filter Name
for the lter rule. Specify protocol, source IP address, subnet
mask and port (range) and destination IP address, subnet mask and port (range).
3. Press
Save/Apply
to save and activate the settings.
Firewall- Incoming IP lter
By default, all incoming IP trafc is blocked. You can allow certain types of IP trafc by
setting up lter rules at DSL-N13.
1. Click
Advanced Setup -> Security -> IP Filtering -> Incoming
in the left side
menu to open the conguration page. Click
Add
to create a new rule.
2. Dene a
Filter Name
for the lter rule. Specify protocol, source IP address, subnet
mask and port (range) and destinationi IP address, submask and port (range).
3. Select the WAN interface through which the packets enter the rewall.
4. Press
Save/Apply
to save and activate the settings.