User Manual

DSL-N13 Wireless ADSL 2/2+ Modem Router User Manual
9
Quick setup
Log onto the DSL-N13 conguration page
1. Type
192.168.1.1
into the address box of your Web browser and press Enter.
2. A login window appears for user name and password. The default username is
admin
, password is
admin
(in lower case).
3. After logging in, you can see the DSL-N13 conguration page.
ADSL setup
1. By default, the
Quick Setup
page pops up. The Quick Setup Wizard automatically
detects your ADSL connection type.
2. If ADSL connection is detected, the next page shows your ISP connection type.
If your ADSL connection is not detected, click
Manual Setting
to manually
set up DSL-N13. Refer to Page 11-13 for manual setting instruction.
-- If your connection type is PPPoE or PPPoA
For dynamic IP users, input your user name and password then click Next.
For static IP users, check Use Static IP Address, input your IP address, then
click Next.
Click Next to save the ADSL information to DSL-N13.
If your actual connection is not PPPoE or PPPoA, click
Manual Setting
to
manually set up DSL-N13. Refer to Page 11-13 for manual setting instruction.