User's Manual
Table Of Contents
- 1 Getting to know your wireless router
- 2 Creating your network
- 3 Network configuration using the web GUI
- Logging in to the web GUI (Graphical User Interface)
- Setting up the wireless security settings
- Managing your network clients
- Monitoring your USB device
- Creating your Guest Network
- Using the Traffic Manager
- Using the USB application
- Using the Servers Center
- Configuring Advanced settings
- Setting up your network printer
- 4 Using the utilities
- 5 Troubleshooting
- Appendices
8
Reset button
This button resets or restores the system to its factory default settings.
Power switch
Press to power on or off the system.
Power (DC-In) port
Insert the bundled AC adapter into this port and connect your router to a
power source.
USB 2.0 port
Insert a USB 2.0 device such as a USB hard disk or USB flash drive into this
port.
LAN 1~4 ports
Connect network cables into these ports to establish LAN connection.
ADSL port
Connects to a splitter or to a telephone outlet via an RJ-11 cable.
WPS button*
This button launches the WPS Wizard.
* The WPS button can be used as a WiFi button by changing the settings in
the Advanced Settings > Administration page.
Rear features
ADSL
WiFi on/off