User's Manual
Table Of Contents
- 1 Getting to know your wireless router
- 2 Creating your network
- 3 Network configuration using the web GUI
- Logging in to the web GUI (Graphical User Interface)
- Setting up the wireless security settings
- Managing your network clients
- Monitoring your USB device
- Creating your Guest Network
- Using the Traffic Manager
- Using the USB application
- Using the Servers Center
- Configuring Advanced settings
- Setting up your network printer
- 4 Using the utilities
- 5 Troubleshooting
- Appendices
44
Cannot find the router:
• Press the Reset button at the rear panel for more than five
seconds.
• Check the settings in the wireless adapter such as SSID and
encryption method.
CannotaccesstheInternetusingawirelessLANadapter.
• Place the router closer to the wireless client.
• Check whether the wireless adapter is connected to the
correct wireless router.
• Check whether the wireless channel in use conforms to the
channels available in your country/area.
• Check the encryption settings.
• Check if the ADSL connection is connected.
• Use a different Ethernet cable.
Internetisnotaccessible.
• Check the status indicators on the ADSL modem and the
wireless router.
• Check if the WAN LED on the wireless router is on. If the LED
is off, switch Ethernet cables and try again.
Authentication:
• Use a wired connection to connect to the router.
• Check the wireless security settings.
• Press the Reset button at the rear panel for more than five
seconds.