User's Manual
Table Of Contents
- 1 Getting to know your wireless router
- 2 Creating your network
- 3 Network configuration using the web GUI
- Logging in to the web GUI (Graphical User Interface)
- Setting up the wireless security settings
- Managing your network clients
- Monitoring your USB device
- Creating your Guest Network
- Using the Traffic Manager
- Using the USB application
- Using the Servers Center
- Configuring Advanced settings
- Setting up your network printer
- 4 Using the utilities
- 5 Troubleshooting
- Appendices
16
1. Ensure that the ADSL LED on the DSL-N12U_C1 front panel is
on and not flashing or off.
2. Launch your web browser. The QIS (Quick Install Setup)
web page appears automatically and begins detecting your
connection type.
If the QIS web page does not appear after you launched your
web browser, disable the proxy settings on your web browser.
Setting up your ADSL router
DSL-N12U_C1
300Mbps
Wireless ADSL Modem Router
3. If the router fails to detect your connection type, the QIS
manual setting page will be displayed. Select your Country and
ISP and click Next to complete setup.