User's Manual
Table Of Contents
- 1 Getting to know your wireless router
- 2 Creating your network
- 3 Network configuration using the web GUI
- Logging in to the web GUI (Graphical User Interface)
- Setting up the wireless security settings
- Managing your network clients
- Monitoring your USB device
- Creating your Guest Network
- Using the Traffic Manager
- Using the USB application
- Using the Servers Center
- Configuring Advanced settings
- Setting up your network printer
- 4 Using the utilities
- 5 Troubleshooting
- Appendices
11
Connecting your devices
Wired connection
To set up your ADSL router using a wired connection:
1. Insert the splitter’s line connector to the phone outlet and
connect your phone into the phone port.
2. Using the bundled phone cable, connect your DSL-N12U_C1’s
ADSL port to the splitter’s DSL port.
3. Using the bundled network cable, connect your computer to
the ADSL router’s LAN port.
• Use a wired connection when setting up your wireless router
to avoid possible wireless setup issues.
• Before setting up your ASUS wireless router, do the following:
• If you are replacing an existing router, disconnect it from
your network.
• Disconnect the cables/wires from your existing modem. If
your modem has a backup battery, remove it as well.
• Reboot your computer (recommended).
Client
Wall power outlet
Splitter
Phone
DSL