User's Manual
Table Of Contents
- 1 Getting to know your wireless router
- 2 Creating your network
- 3 Network configuration using the web GUI
- Logging in to the web GUI (Graphical User Interface)
- Setting up the wireless security settings
- Managing your network clients
- Monitoring your USB device
- Creating your Guest Network
- Using the Traffic Manager
- Using the USB application
- Using the Servers Center
- Configuring Advanced settings
- Setting up your network printer
- 4 Using the utilities
- 5 Troubleshooting
- Appendices
10
What you need
To set up your network, you need one or two computers that meet
the following system requirements:
• Ethernet RJ-45 (LAN) port (10Base-T/100Base-TX)
• IEEE 802.11b/g/n wireless capability
• An installed TCP/IP service
• Web browser such as Microsoft Internet Explorer, Mozilla
Firefox, Apple Safari, or Google Chrome
• If your computer does not have built-in wireless capabilities,
install an IEEE 802.11b/g/n WLAN adapter to your computer
to connect to the network.
• The Ethernet RJ-45 cables used to connect the network
devices should not exceed 100 meters.