User's Manual
Table Of Contents
- 1 Getting to know your ADSL modem router
- 2 Getting started
- 3 Configuring the General settings
- 4 Configuring the System settings
- 5 Logout & Reboot
- Appendix A - Firewall
- Appendix B - Pin Assignments
- Appendix C – Specifications
- Appendix D - SSH Client
- Appendix E - Connection Setup
- Appendix F - WPS OPERATION
- Appendix G
86
Options Description
Bitswap Enable Enables adaptive handshaking functionality
SRA Enable Enables Seamless Rate Adaptation (SRA)
Select DSL LED
behavior
Normal (TR-68 compliant): Select this option for DSL LED to
operate normally (See section 1.3 Your ADSL modem router)
O:DSL LED will always be OFF
G997.1 EOC xTU-R
Serial Number
Select Equipment Serial Number or Equipment MAC Address
to use router’s serial number or MAC address in ADSL EOC
messages
Advanced DSL Settings
Click Advanced Settings to reveal additional options.
On this screen you select the required test mode, then click the
Apply button.
Field Description
Normal DSL line signal is detected and sent normally
Reverb DSL line signal is sent continuously in reverb mode
Medley DSL line signal is sent continuously in medley mode
No Retrain DSL line signal will always be on even when DSL line is
unplugged
L3 DSL line is set in L3 power mode