User's Manual
Table Of Contents
- 1 Getting to know your ADSL modem router
- 2 Getting started
- 3 Configuring the General settings
- 4 Configuring the System settings
- 5 Logout & Reboot
- Appendix A - Firewall
- Appendix B - Pin Assignments
- Appendix C – Specifications
- Appendix D - SSH Client
- Appendix E - Connection Setup
- Appendix F - WPS OPERATION
- Appendix G
79
Field Description
Destination MAC Address A packet belongs to SET-1 then the result that the
Destination MAC Address of its header binary-AND
to the Destination MAC Mask must equal to the
result that this eld binary-AND to the Destination
MAC Mask.
Destination MAC Mask This is the mask used to decide how many bits are
checked in Destination MAC Address.
Classication Results
Specify Class Queue Packets classied into a queue that exit through
an interface for which the queue is not specied to
exist, will instead egress to the default queue on the
interface.
Specify Class Policer Packets classied into a policer will be marked
based on the conforming action of the policer
Mark Dierentiated Service
Code Point
The selected Code Point gives the corresponding
priority to packets that satisfy the rule.
Mark 802.1p Priority Select between 0-7.
Set Rate Limit The data transmission rate limit in kbps.
3.3.3 UPnP
Click the UPnP tab to display the following.
Select the checkbox and click Apply/Save to enable UPnP.