User's Manual

65
Consult the table below for eld and header descriptions.
Field Description
Use Interface Select a WAN interface from the drop-down box.
Select a Service User should select the service from the list.
Custom Service User can enter the name of their choice.
Server IP Address Enter the IP address for the server.
Enable NAT Loopback Allows local machines to access virtual server via
WAN IP Address
External Port Start Enter the starting external port number (when
you select Custom Server). When a service is
selected, the port ranges are automatically
congured.
External Port End Enter the ending external port number (when
you select Custom Server). When a service is
selected, the port ranges are automatically
congured.
Protocol TCP, TCP/UDP, or UDP.
Internal Port Start Enter the internal port starting number (when
you select Custom Server). When a service is
selected the port ranges are automatically
congured
Internal Port End Enter the internal port ending number (when you
select Custom Server). When a service is selected,
the port ranges are automatically congured.