User's Manual
Table Of Contents
- 1 Getting to know your ADSL modem router
- 2 Getting started
- 3 Configuring the General settings
- 4 Configuring the System settings
- 5 Logout & Reboot
- Appendix A - Firewall
- Appendix B - Pin Assignments
- Appendix C – Specifications
- Appendix D - SSH Client
- Appendix E - Connection Setup
- Appendix F - WPS OPERATION
- Appendix G
52
OUTGOING IP FILTER
By default, all outgoing IP trac is allowed, but IP trac can be
blocked with lters.
To add a lter (to block some outgoing IP trac), click the Add
button.
On the following screen, enter your lter criteria and then click
Apply/Save.
Consult the table below for eld descriptions.
Field Description
Filter Name The lter rule label.
IP Version Select from the drop down menu.
Protocol TCP, TCP/UDP, UDP, or ICMP.
Source IP address Enter source IP address.
Source Port (port or port:port) Enter source port number or range.
Destination IP address Enter destination IP address.
Destination Port (port or port:port) Enter destination port number or range.