User's Manual
Table Of Contents
- 1 Getting to know your ADSL modem router
- 2 Getting started
- 3 Configuring the General settings
- 4 Configuring the System settings
- 5 Logout & Reboot
- Appendix A - Firewall
- Appendix B - Pin Assignments
- Appendix C – Specifications
- Appendix D - SSH Client
- Appendix E - Connection Setup
- Appendix F - WPS OPERATION
- Appendix G
41
Enable Enhanced IGMP: Enable by ticking the checkbox. IGMP
packets between LAN ports will be blocked.
Enable LAN side rewall: Enable by ticking the checkbox.
DHCP Server: To enable DHCP, select Enable DHCP server and
enter Start and End IP addresses and the Leased Time. This setting
congures the router to automatically assign IP, default gateway
and DNS server addresses to every PC on your LAN.
Setting TFTP Server: Enable by ticking the checkbox. Then, input
the TFTP server address or an IP address.
Static IP Lease List: A maximum of 32 entries can be congured.
To add an entry, enter MAC address and Static IP address and then
click Apply/Save.
To remove an entry, tick the corresponding checkbox in the
Remove column and then click Remove Entries.