User's Manual
Table Of Contents
- 1 Getting to know your ADSL modem router
- 2 Getting started
- 3 Configuring the General settings
- 4 Configuring the System settings
- 5 Logout & Reboot
- Appendix A - Firewall
- Appendix B - Pin Assignments
- Appendix C – Specifications
- Appendix D - SSH Client
- Appendix E - Connection Setup
- Appendix F - WPS OPERATION
- Appendix G
27
Click the Reset Statistics button to refresh this screen.
Field Description
Mode ADSL2, ADSL2+
Trac Type ATM
Status Lists the status of the DSL link
Link Power State Link output power state.
phyR Status Shows the status of PhyR™ (Physical
Layer Re-Transmission) impulse noise
protection
Line Coding (Trellis) Trellis On/O
SNR Margin (0.1 dB) Signal to Noise Ratio (SNR) margin
Attenuation (0.1 dB) Estimate of average loop attenuation in
the downstream direction.
Output Power
(0.1 dBm) Total upstream output power
Attainable Rate (Kbps) The sync rate you would obtain.
Rate (Kbps) Current sync rates downstream/upstream
K Number of bytes in DMT frame
R Number of check bytes in RS code word
S RS code word size in DMT frame
D Interleaver depth
Delay The delay in milliseconds (msec)
INP DMT symbol
Super Frames Total number of super frames
Super Frame Errors Number of super frames received with
errors
RS Words Total number of Reed-Solomon code
errors
RS Correctable Errors Total Number of RS with correctable
errors
RS Uncorrectable Errors Total Number of RS words with
uncorrectable errors