User manual
30
DSL-N10S Chapter4:ConguringviathewebGUI
Configure the Filter settings
The Filter page allows you to restrict certain types of outgoing or incoming data
packets from or to the network clients based on their MAC addresses.
To configure the Filter settings:
1. Click Access Management > Filter tab.
2. Select the Filter Type Selection.
3. In the Direction eld, select Outgoing, Incoming, or Both.
4. In the Source IP address eld, key in the IP address of the network client
whose incoming packets you want to restrict.
5. In the Destination IP address eld, key in the IP address of the network
client whose outgoing packets you want to restrict.
6. Click Save to add the IP lter settings to the IP/MAC Filter Listing.