User manual

29
Chapter 4: Conguring via the web GUI DSL-N10S
Configuring the Access Management
The Advanced Setup page allows you to congure the following advanced
settings: ACL, Filter, SNMP, UPnP, and DDNS.
Configuring the ACL
The ACL (Access Control List) conguration page allows you to specify the
services that are accessible from LAN or WAN side.
To configure the ACL settings:
1. Click Access Management > ACL tab.
2. In ACL, tick Activated to enable ACL management.
3. In the IP Address elds, key in the desired IP to add.
4. Click Save.