User's Manual

DSL-N10 Chapter 4: Conguring via the web GUI

Ethernet WAN

Ethernet WAN allows you to connect the ber/xDSL/cable modem cable to your

DSL-N10 specied Ethernet WAN port to work as a pure router. If Ethernet WAN is

enabled, DSL WAN will be disabled.

To set up the Ethernet WAN:

1. Choose the LAN port that you want to use as a WAN port.

2. Follow the steps in setting up a home router.

3. Click apply to save the settings.

Note: When you enable the LAN to WAN function, the specied LAN port will lose its connection

to the local area network (LAN).