User Manual

4-20
Chapter 4: BIOS setup
ItemSpecicHelp
CongurestheMP
Specicationrevision
level. Some operating
systems will require
1.1 for compatibility
reasons.
Advanced Processor Options
 MultiprocessorSpecication  [1.4]
Numbers of Stop Grant [Per Core]
Intel(R) Virtualization Technology [Enabled]
Thermal Management 2 [Disabled]
C1 Enhanced Mode [Enabled]
No Execute Mode Mem Protection [Enabled]
Set Max Ext CPUID = 3 [Disabled]
Discrete MTRR Allocation [Disabled]
Processor Power Management [Disabled]
PhoenixBIOS Setup Utility
Advanced
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →← : Select Menu Enter: Select SubMenu F10: Save and Exit
If you install a 5100/5300 series CPU, the BIOS screen appears as the following.
Multiprocessor Specication [1.4]
Allows you to congure the MP Specication revision level.
Conguration options: [1.1] [1.4]
Numbers of Stop Grant [Per Core]
Conguration options: [Per Core] [Single]
Intel(R) Virtualization Technology [Enabled]
Conguration options: [Disabled] [Enabled]
Thermal Management 2 [Disabled]
Conguration options: [Disabled] [Enabled]
C1 Enhanced Mode [Enabled]
Allows you to enable or disable C1E mode. In C1E mode, the CPU power
consumption is lower when idle. Conguration options: [Disabled] [Enabled]
No Execute Mode Mem Protection [Enabled]
Conguration options: [Disabled] [Enabled]
Set Max Ext CPUID = 3 [Disabled]
Enable this item to boot legacy operating systems that cannot support CPUs with
extended CPUID functions. Conguration options: [Disabled] [Enabled]