User Manual

2-40
Chapter 2: Hardware information
8. IEEE 1394a connector (10-1 pin 1394_2)
This connector is for an 1394a port. Connect the 1394a module cable to this
connector, then install the module to a slot opening at the back of the system
chassis.
The 1394a port module is purchased separately.
®
DSGC-DW Series Onboard LED
IE1394_1
PIN1
TPA2- GND TPB2- +12V GND
TPA2+
GND
TPB2+
+12V
NEVER connect a USB cable to the IEEE 1394a connector. Doing so will
damage the motherboard!
9. USB connectors (10-1 pin USB56, USB78)
These connectors are for USB 2.0 ports. Connect the USB/GAME module
cable to any of these connectors, then install the module to a slot opening at
the back of the system chassis. These USB connectors comply with USB 2.0
specication that supports up to 480 Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
®
DSGC-DW Series USB connectors
USB56
USB+5V USB_P6- USB_P6+ GND NC
USB+5V
USB_P5-
USB_P5+
GND
PIN1
USB78
USB+5V USB_P8- USB_P8+ GND NC
USB+5V
USB_P7-
USB_P7+
GND
PIN1