User Manual

ASUS DSGC-DW Series
2-31
6. Onboard storage setting (3-pin SAS_EN1)
(for DSGC-DW/SAS model only)
This jumper allows you to select the onboard storage to use. Place the jumper
caps on pins 1-2 if you want to use the Intel
®
6321ESB-supported Ultra DMA/
Serial ATA II devices (default); otherwise, place the jumper caps on pins 2-3
to use Serial Attached SCSI (SAS) storage device supported by the LSI1068
PCI-X SAS controller.
7. Force BIOS recovery setting (3-pin RECOVERY1)
This jumper allows you to quickly update or recover the BIOS settings when it
becomes corrupted.
To update the BIOS:
1. Prepare a oppy disk that contains the latest BIOS for the motherboard
and the Phoenix Phlash16 utility. Make sure you download the correct
BIOS for your motherboard model.
2. Set the jumper to pins 2-3.
3. Insert the oppy disk then turn on the system to update the BIOS.
4. Shut down the system.
5. Set the jumper back to pins 1-2.
6. Turn on the system.
®
DSGC-DW/SAS SAS setting
SAS_EN1
1 2 2 3
Enable
(Default)
Disable
®
DSGC-DW Series BIOS recovery setting
RECOVERY1
(Default)
Normal BIOS Recovery
1 2 2 3
Refer to section "4.1.3 ASUS Crashfree BIOS 2 utility" for more information.