Computer Hardware User Manual
Table Of Contents
- DSEB-D16 Series specifications summary
- Typography
- About this guide
- Safety information
- Notices
- Product introduction
- Hardware information
- Powering up
- BIOS setup
- RAID configuration
- 5.1 Setting up RAID
- 5.2 LSI Software RAID Configuration Utility
- 5.2.1 Creating a RAID 0 or RAID 1 set
- 5.2.2 Creating a RAID 10 set
- 5.2.3 Adding or viewing a RAID configuration
- 5.2.4 Initializing the logical drives
- 5.2.5 Rebuilding failed drives
- 5.2.6 Checking the drives for data consistency
- 5.2.7 Deleting a RAID configuration
- 5.2.8 Selecting the boot drive from a RAID set
- 5.2.9 Enabling the WriteCache
- 5.3 Intel® Matrix Storage Manager Option ROM Utility
- 5.4 Global Array Manager
- 5.5 LSI Logic MPT Setup Utility (DSEB-D16/SAS model only)
- Driver installation
- Reference information
ASUS DSEB-D16 Series 4-27
The following items appear when you enable the Smart Fan Control feature.
CPU1/2 Target Temperature [55]
Allows you to set the CPU target temperature.
Conguration options: [40]~[55]
System1/2 Target Temperature [70]
Allows you to set the system target temperature.
Conguration options: [35]~[70]
VCORE1/2 Voltage, VTT Voltage, 1.5V Voltage, 1.8V Voltage,
3.3V Voltage, 5V Voltage, 5VSB Voltage, 12V Voltage, VBAT Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators. The VCORE2 item shows N/A if no processor is
installed in CPU2 socket.