Computer Hardware User Manual
Table Of Contents
- DSEB-D16 Series specifications summary
- Typography
- About this guide
- Safety information
- Notices
- Product introduction
- Hardware information
- Powering up
- BIOS setup
- RAID configuration
- 5.1 Setting up RAID
- 5.2 LSI Software RAID Configuration Utility
- 5.2.1 Creating a RAID 0 or RAID 1 set
- 5.2.2 Creating a RAID 10 set
- 5.2.3 Adding or viewing a RAID configuration
- 5.2.4 Initializing the logical drives
- 5.2.5 Rebuilding failed drives
- 5.2.6 Checking the drives for data consistency
- 5.2.7 Deleting a RAID configuration
- 5.2.8 Selecting the boot drive from a RAID set
- 5.2.9 Enabling the WriteCache
- 5.3 Intel® Matrix Storage Manager Option ROM Utility
- 5.4 Global Array Manager
- 5.5 LSI Logic MPT Setup Utility (DSEB-D16/SAS model only)
- Driver installation
- Reference information

ASUS DSEB-D16 Series 4-21
Onboard LAN1/2/3/4 Conguration
BIOS SETUP UTILITY
Advanced
Onboard LAN Conguration
Option ROM Scan [Enabled]
Option ROM Priority [Normal]
Bus Master [Enabled]
Latency Timer [Default]
Initialize device
expansion ROM.
Option ROM Scan [Enabled]
Allows you to enable or disable the device expansion ROM.
Conguration options: [Disabled] [Enabled]
Option ROM Priority [Normal]
Allows you to set the option ROM priority.
Conguration options: [Low] [Normal] [High] [Highest]
Bus Master [Enabled]
Set this item to [Enabled] to enable the selected device as a PCI bus master.
Conguration options: [Disabled] [Enabled]
Latency Timer [Default]
Allows you to set the PCI device latency timer register.
Conguration options: [Default] [32] [64] [96] [128] [160] [192] [224]
PCI-Express Slot1/2/3; PCI-X Slot 4 Conguration
BIOS SETUP UTILITY
Advanced
PCI-Express Slot 1 Conguration
Option ROM Scan [Enabled]
Option ROM Priority [Normal]
Bus Master [Enabled]
Latency Timer [Default]
Initialize device
expansion ROM.
Option ROM Scan: [Enabled]
Allows you to enable or disable the device expansion ROM.
Conguration options: [Disabled] [Enabled]
Option ROM Priority [Normal]
Allows you to set the option ROM priority.
Conguration options: [Low] [Normal] [High] [Highest]
Bus Master [Enabled]
Set this item to [Enabled] to enable the selected device as a PCI bus master.
Conguration options: [Disabled] [Enabled]
Latency Timer [Default]
Allows you to set the PCI device latency timer register.
Conguration options: [Default] [32] [64] [96] [128] [160] [192] [224]










